Technical Parameters of I-PTE generator

Name of parameters	Unit of measurement	Value
Type of regenerator	-	I-PTE- 800-825-50-6	I-PTE- 1,6к-825-50-12	I-PTE- 3,2к-825-50-12
Rated output voltage	kV	6,3, 10, 35 (±10 %)
Output voltage frequency	Hz	50 (60) ±1
Number of output voltage phases	-	3
Number of inputs	-	1
Operation mode	-	Intermittent S3, RC = 40 %
Rated input voltage	V	825 (750)
Regeneration setting adjustment range	V	810…950 (725...850)
Rated inverted current	А	800	1600	3200
Maximum ratio of current overload	-	1.5
Overload time	s	30 1 time per 10 min, wherein current RMS value for each 15 min should not exceed rated current value
Type of cooling	-	Natural or air combined*
Efficiency coefficient, minimum	%	96

* - cooling method, which uses natural air cooling of thyristors, and the installed in sections
fans switch on automatically for a short time, when temperature rises to the set level, and switch off when the temperature decreases.